The XTK 30AP, 500mW AP/Client/Bridge/Repeater  is perfect for added throughput and increased distance in Wifi installations. This superior 29.8dBm output (Ap + built in Booster function) with result power over ethernet connect upto 100 meter application.It is 802.11g compliant and backwords compatible with 802.11b standard. It enhanced security with WPA/WPA2 and WEP data encryption. In additional, It also support WDS (Wireless Distributed System) bridge mode. and AP. AP client, and repeater mode. with web based configuration.

Xiertek  currently designs and manufactures wireless network equipment for the 2.4 GHz  complies with the IEEE 802.11g (DSSS). It supports 2.400~2.4835 GHz frequency band., 1-14 channels.  We also provide design services for OEM parnters in a variety of wireless standards, including 5 GHz, Wimax, Bluetooth, CDMA, GSM, etc.

All wireless data systems consist of 3 elements, a radio, amplifier and antenna. Most manufacturers spend all of the engineering energy on software features, and spend little time refining the RF components, including the amplifier and antenna. Most of the WLAN equipment on the market today have great software feautures, but bad delivery systems.Our design philosophy is simple: your equipment can have all of the software features available, but without a clean and powerful RF transmission system, the data packet never reaches it's destination. Xiertek specializes in manufacturing clean and powerful radios, amplifiers and antenna systems that will give your wireless network the cleanest and strongest Signal to Noise Ratio (SNR) available on the market today.

XTK-30 Multi-AP Specifications  Modes Access Point / AP Client / Repeater / WDS Bridge Standards OFDM & DSSS Frequency Range 2.4 - 2.497 GHz ISM band Transmit Power Min 27dBm-Max 29 dBm +/- 1 dBm Receiver Sensitivity < -72 dBm @ 54 Mbps < -86 dBm @ 11 Mbps RF Antenna ISM Band, Omni-Directional detachable RP-SMA, 2dBi gain Interface 1 - 10Base-T/100Base-TX Ethernet port 1 - power port Security WPA / WPA2 / WEP 64 & 128 bit Device Management Web-based manager Operating Range  4500+ feet in door range ** The practical operating range depends on the environment Power Supply Input: 100~240V AC 50~60Hz Output: 18V DC 1A POE ( Power Over Ethernet ) runs up to 330 Ft. Environment 0~55°C (32~131°F) - Operating -20~80°C (-4~176°F) - Storage Humidity (non-condensing) 5%~95% typical As an Access Point, the XTK30AP utilizes Level 2 Peer-to-Peer Blocking to provide unmatched security for client devices on your wireless network. Its 500mW of RF transmit power and power-over Ethernet (POE) function, save wireless network owners money by eliminating the need for additional external amplifiers and power termination. These features also make the XTK30AP, the best choice for use as a Client Bridge. When paired with a directional antenna, its superior signal quality and range maximize transmission speeds even at the farthest reach of the RF signal. The compact size and multiple mounting options of the XTK30AP allow for installation virtually anywhere. The XTK30AP is the choice in high powered radio equipment for wireless network deployment  XTK 30 Multi-AP Specification: Modes High Power Access Point / Client / WDS Bridge / Repeater Standards IEEE 802.11 IEEE 802.11g WLAN Compliant Direct Sequence Spread Spectrum (DSSS) Wireless Frequency Range 2.4 ~ 2.497 GHz ISM Band Data Range & Modulation 11Mbps (CCK) 2Mbps (DQPSK) 5.5Mbps (CCK) 1Mbps (DBPSK) RF Transmit Power (Adjustable) +17dBm (50mW) +20dBm (100mW) +24dBm (250mW) +27dBm (500mW) +29.8dBm (960mW) Receiver Sensitivity < -72 dBm @ 54Mbps < -85 dBm @ 11Mbps < -93 dBm @ 1Mbps Receive Gain 16dB Max RF Antenna ISM Band, Omni-Directional detachable RP-SMA, 2dBi gain Interface 1 - 10Base-T/100Base-TX Ethernet port 1 - power port Protocols Supported TCP/IP DHCP client Wireless Bridging WPA 802.11f / IAPP HTTP SNMP Security Level 2 Peer to Peer Blocking WPA/WPA 2/64 &128-bit WEP (RC4) IEEE 802.1x port-based authentication MAC address-based access control Device Management Web-based manager SNMP MIB 1 & MIB 2 Operating Range Indoor: 1200 to 4500+ft (Max) Outdoor:4500 to 10000+ ft (Max) in open area only  Lightning Protect Surge Current 20KA Power Supply (POE or Direct) Power Over Ethernet Standard: (POE runs up to 330 Ft.) Input: 100~240V AC 50~60Hz Output: 18V DC 1A Modulation Techniques 11g: DSSS (CCK, DQPSK, DBPSK) Physical Dimensions (L) 5.12 in. (W) 3.7 in. (H) 1.02 in. Environment 0~55°C (32~131°F) - Operating -20~80°C (-4~176°F) - Storage Humidity (non-condensing) 5%~95% typical Warranty 2 Years Limited Package Contents XTK 30 Multi AP 500mW,  Removable 2 dBi RP-SMA Antenna  DC 18v 1A Power Adapter POE Injector  18VDC Power Adapter for extended PoE runs (Standard) 3 fts Crossover Ethernet Cable Quick Install Manual and CD. Retail  Package Contents 1-XTK 30 Multi AP./ *2 dBi RP-SMA Antenna. /*1-DC18V 1A Power Adapter/*1- 3 fts Crossover ethernet Cable./*1-Power Over Etnernet Injector. *1-Quick Install Manual and CD Driver. Retail PKG. 2yrs Warranty!