We can make the precision stainless steel turning auto part, automobile pressing parts, player Metal housing, automotive sheet metal stamping parts, automotive sheet metal bending parts , automotive sheet metal laser cutting parts, etc.

Why the automotive area will have sheet metal parts? There is some reason for it. sheet metal was easy to production and mass products and it also could make the precision part. Like you could design it up to your mind, for example, your auto part has the demand for the bending degree, hole size , plating, and the thickness. Our designer will be drawing a drawing for you depend on you requirement and you could put your idea in the project.

Automobile Pressing Parts

The principle of metal stamping parts processing, metal or non-metal deformation under the action of external force, when the external force exceeds the yield limit of the material, plastic deformation begins.

APPLICATION

Material non-ferrous metals such as stainless steel, copper and aluminum
Surface treatment Galvanizing
Process digital punching, bending, pressure riveting, galvanizing
Tolerance ±0.05 mm
Features Stainless steel is steel that is not easy to rust. In fact, some stainless steels have both rust and acid resistance (corrosion resistance).
Expansion The principle of metal stamping parts processing, metal or non-metal deformation under the action of external force, when the external force exceeds the yield limit of the material, plastic deformation begins.

If the pressure is increased and exceeds the ultimate strength of the material, the metal or non-metal begins to break and separate. Cold stamping is the use of the property of metal to separate or deform the material at room temperature to obtain the desired shape and precision requirements.
Metal stamping parts process characteristics
  1. under the impact of the punch, can get complex shapes of parts.
  2. After processing, the parts have high precision, stable size and good interchangeability.
  3. Under the condition that the material loss is not large, the parts with light weight, good strength, good rigidity and smooth appearance are obtained.
  4. Material utilization rate is as high as 75%~85%. Most of the materials used are plate or coil material.
Back to List
TOP